Administration
This section provides instructions on configuring the Kaspersky IoT Secure Gateway 100 settings for transmitting data received from industrial facilities in the internal enterprise network to the Siemens MindSphere cloud platform.
To perform this configuration, you must extract the SD card from the SD slot of the Siemens SIMATIC IoT2040 device, insert the SD card into the workstation, perform the actions described in this section, then insert the SD card back into its original slot. Please note that the TGW-HW-BOOT section on the SD card is formatted with the FAT32 file system. All other sections are formatted with the ext3 file system.
To correctly transmit data from enterprise equipment to the Siemens MindSphere cloud platform via Kaspersky IoT Secure Gateway 100, the following is required:
- Generate certificates for OPC UA protocol clients in case an encrypted connection and/or user authorization is used.
- At the industrial enterprise facility (equipment), configure the nodes used to transmit data over the OPC UA protocol.
You can read about the OPC UA protocol specification on the developer's website. The current version of Kaspersky IoT Secure Gateway 100 supports OPC UA protocol version 1.04.
- Obtain access to the Siemens MindSphere cloud platform and configure the data points for receiving data from the MindConnect Lib agent.
For detailed information on the ways to obtain access to the Siemens MindSphere platform and configure data points, please refer to the Siemens MindSphere documentation.
- Configure the Kaspersky IoT Secure Gateway 100 settings for transmitting data received from industrial facilities in the internal enterprise network to the Siemens MindSphere cloud platform.