Kaspersky Next XDR Expert
1.1.9

Contents

Hardware and software requirements

This article describes hardware requirements of single node deployment scheme and distributed deployment scheme, software requirements of Open Single Management Platform, hardware and software requirements of Kaspersky Deployment Toolkit and OSMP components.

Single node deployment: hardware requirements

Single node scheme only supports up to 10,000 devices in the network.

Additional nodes are required for KATA/KEDR.

In case of single node deployment, it is strongly recommended that you first install the DBMS manually on the host that will act as a primary node. After that, you can deploy Kaspersky Next XDR Expert on the same host.

Minimum hardware requirements

Solution

250 devices

1000 devices

3000 devices

5000 devices

10,000 devices

A solution that includes the following applications:

  • Open Single Management Platform
  • Kaspersky Unified Monitoring and Analysis Platform

Minimum solution configuration*:

1 target host

Minimum solution configuration*:

1 target host

Minimum solution configuration*:

1 target host

Minimum solution configuration*:

1 target host

Minimum solution configuration*:

1 target host
  • CPU: 6 cores, operating frequency of 2.5 GHz
  • RAM: 27 GB
  • Available disk space: 360 GB
  • CPU: 10 cores, operating frequency of 2.5 GHz
  • RAM: 38 GB
  • Available disk space: 550 GB
  • CPU: 12 cores, operating frequency of 2.5 GHz
  • RAM: 42 GB
  • Available disk space: 700 GB
  • CPU: 17 cores, operating frequency of 2.5 GHz
  • RAM: 50 GB
  • Available disk space: 0.9 TB
  • CPU: 20 cores, operating frequency of 2.5 GHz
  • RAM: 57 GB
  • Available disk space: 1.6 TB

A solution that includes the following applications:

  • Open Single Management Platform
  • Kaspersky Unified Monitoring and Analysis Platform
  • Kaspersky Anti-Targeted Attack Platform / Kaspersky Endpoint Detection and Response Central Node
  • Kaspersky Sandbox

 

Minimum solution configuration*:

  • 1 target host
  • 2 KATA/KEDR hosts

Minimum solution configuration*:

  • 1 target host
  • 2 KATA/KEDR hosts

Minimum solution configuration*:

  • 1 target host
  • 2 KATA/KEDR hosts

Minimum solution configuration*:

  • 1 target host
  • 2 KATA/KEDR hosts

Minimum solution configuration*:

  • 1 target host
  • 2 KATA/KEDR hosts

1 target host:

  • CPU: 6 cores
  • RAM: 27 GB
  • Available disk space: 360 GB

1 CN host (KATA/KEDR):

  • CPU: 8 cores
  • RAM: 64 GB
  • Primary disk subsystem: 4 disks 1200 GB (RAID 10)
  • Secondary disk subsystem: 4 disks 1200 GB (RAID 10)

1 Sandbox host (KATA/KEDR):

  • CPU: 32 cores
  • RAM: 80 GB
  • Primary disk subsystem: 2 disks 600 GB (RAID 1)

1 target host:

  • CPU: 10 cores
  • RAM: 38 GB
  • Available disk space: 550 GB

1 CN host (KATA/KEDR):

  • CPU: 8 cores
  • RAM: 64 GB
  • Primary disk subsystem: 4 disks 1200 GB (RAID 10)
  • Secondary disk subsystem: 4 disks 1200 GB (RAID 10)

1 Sandbox host (KATA/KEDR):

  • CPU: 32 cores
  • RAM: 80 GB
  • Primary disk subsystem: 2 disks 600 GB (RAID 1)

1 target host:

  • CPU: 12 cores
  • RAM: 42 GB
  • Available disk space: 700 GB

1 CN host (KATA/KEDR):

  • CPU: 12 cores
  • RAM: 80 GB
  • Primary disk subsystem: 4 disks 1200 GB (RAID 10)
  • Secondary disk subsystem: 8 disks 1200 GB (RAID 10)

1 Sandbox host (KATA/KEDR):

  • CPU: 32 cores
  • RAM: 80 GB
  • Primary disk subsystem: 2 disks 600 GB (RAID 1)

1 target host:

  • CPU: 17 cores
  • RAM: 50 GB
  • Available disk space: 0.9 TB

1 CN host (KATA/KEDR):

  • CPU: 16 cores
  • RAM: 96 GB
  • Primary disk subsystem: 4 disks 1200 GB (RAID 10)
  • Secondary disk subsystem: 8 disks 1200 GB (RAID 10)

1 Sandbox host (KATA/KEDR):

  • CPU: 32 cores
  • RAM: 80 GB
  • Primary disk subsystem: 2 disks 600 GB (RAID 1)

1 target host:

  • CPU: 20 cores
  • RAM: 57 GB
  • Available disk space: 1.6 TB

1 CN host (KATA/KEDR):

  • CPU: 24 cores
  • RAM: 144 GB
  • Primary disk subsystem: 4 disks 1200 GB (RAID 10)
  • Secondary disk subsystem: 8 disks 1200 GB (RAID 10)

1 Sandbox host (KATA/KEDR):

  • CPU: 32 cores
  • RAM: 80 GB
  • Primary disk subsystem: 2 disks 600 GB (RAID 1)

* The requirements do not take into account hosts for KUMA services. Refer to the following topic for details: Requirements for hosts with KUMA services.

To deploy the solution correctly, ensure that CPU of the target host supports the BMI, AVX, and SSE 4.2 instruction set.

Distributed deployment: hardware requirements

Multi-node cluster scheme is recommended for networks that exceed 10,000 devices.

Minimum hardware requirements

Solution

20,000 devices

30,000 devices

A solution that includes the following applications:

  • Open Single Management Platform
  • Kaspersky Unified Monitoring and Analysis Platform

 

Minimum solution configuration*:

  • 4 target hosts
  • 1 database host

Minimum solution configuration*:

  • 4 target hosts
  • 1 database host

Aggregate performance of target hosts:

  • CPU: 28 cores, operating frequency of 2.5 GHz
  • RAM: 77 GB
  • Available disk space: 4.6 TB

Aggregate performance of target hosts:

  • CPU: 32 cores, operating frequency of 2.5 GHz
  • RAM: 83 GB
  • Available disk space: 6.5 TB

Database host**:

  • CPU: 10 cores, operating frequency of 2.5 GHz
  • RAM: 21 GB
  • Available disk space: 2.6 TB

Database host**:

  • CPU: 12 cores, operating frequency of 2.5 GHz
  • RAM: 24 GB
  • Available disk space: 3.7 TB

A solution that includes the following applications:

  • Open Single Management Platform
  • Kaspersky Unified Monitoring and Analysis Platform
  • Kaspersky Anti-Targeted Attack Platform / Kaspersky Endpoint Detection and Response Central Node
  • Kaspersky Sandbox

Minimum solution configuration*:

  • 4 target hosts
  • 1 database host
  • 1 KATA/KEDR host

Minimum solution configuration*:

  • 4 target hosts
  • 1 database host
  • 1 KATA/KEDR host

Aggregate performance of target and KATA/KEDR hosts:

  • CPU: 188 cores, operating frequency of 2.5 GHz
  • RAM: 1037 GB
  • Available disk space: 63.5 TB

Aggregate performance of target and KATA/KEDR hosts:

  • CPU: 256 cores, operating frequency of 2.5 GHz
  • RAM: 1315 GB
  • Available disk space: 91.7 TB

Database host**:

  • CPU: 10 cores, operating frequency of 2.5 GHz
  • RAM: 21 GB
  • Available disk space: 2.6 TB

Database host**:

  • CPU: 12 cores, operating frequency of 2.5 GHz
  • RAM: 24 GB
  • Available disk space: 3.7 TB

* The requirements do not take into account hosts for KUMA services. Refer to the following topic for details: Requirements for hosts with KUMA services.

** The database can be hosted either inside the cluster or on a separate host outside the cluster.

To deploy the solution correctly, ensure that CPUs of target hosts support the BMI/AVX instruction set.

Open Single Management Platform: Software requirements

Software requirements and supported systems and platforms

Operating system

64-bit versions of the following operating systems are supported:

Astra Linux Special Edition RUSB.10015-01 (2023-0426SE17 update 1.7.4)

Ubuntu Server 22.04 LTS

Debian GNU/Linux 11.х (Bullseye)

Virtualization platforms

VMWare vSphere 7

VMWare vSphere 8

Microsoft Hyper-V Server 2016

Microsoft Hyper-V Server 2019

Microsoft Hyper-V Server 2022

Kernel-based Virtual Machine

Proxmox Virtual Environment 7.2

Proxmox Virtual Environment 7.3

Nutanix AHV 20220304.242 and later

Database management system (DBMS)

PostgreSQL 13.х 64-bit

PostgreSQL 14.х 64-bit

PostgreSQL 15.х 64-bit

Postgres Pro 13.х 64-bit (all editions)

Postgres Pro 14.х 64-bit (all editions)

Postgres Pro 15.х 64-bit (all editions)

Kaspersky Deployment Toolkit

All Open Single Management Platform components are installed by using Kaspersky Deployment Toolkit.

Kaspersky Deployment Toolkit has the following hardware and software requirements:

Specification

System requirements

Hardware

CPU: 4 cores, operating frequency of 2.5 GHz

RAM: 8 GB

Available disk space: 40 GB

Operating system

64-bit versions of the following operating systems are supported:

  • Astra Linux Special Edition RUSB.10015-01 (2023-0426SE17 update 1.7.4)
  • Oracle Linux 9
  • Ubuntu Server 22.04 LTS
  • Debian GNU/Linux 11.х (Bullseye)
  • CentOS 7.x
  • CentOS 8.x

Open Single Management Platform components

To view the hardware and software requirements for an Open Single Management Platform component, click its name:

Page top
[Topic 247187]

Requirements for hosts with KUMA services

The KUMA services (collectors, correlators, and storages) are installed on the hosts that are outside of the Kubernetes cluster. Hardware and software requirements for these hosts are described in this article.

Recommended hardware and software requirements

This section lists the hardware and software requirements for processing a data stream of up to 40,000 events per second (EPS). The KUMA load value depends on the type of events being parsed and the efficiency of the normalizer.

For event processing efficiency, the CPU core count is more important than the clock rate. For example, 8 CPU cores with a medium clock rate can process events more efficiently than 4 CPU cores with a high clock rate. The table below lists the hardware and software requirements of KUMA components.

The amount of RAM utilized by the collector depends on configured enrichment methods (DNS, accounts, assets, enrichment with data from Kaspersky CyberTrace) and whether aggregation is used. RAM consumption is influenced by the data aggregation window setting, the number of fields used for aggregation of data, volume of data in fields being aggregated.

For example, with an event stream of 1000 EPS and event enrichment disabled (event enrichment is disabled, event aggregation is disabled, 5000 accounts, 5000 assets per tenant), one collector requires the following resources:

  • 1 CPU core or 1 virtual CPU
  • 512 MB of RAM
  • 1 GB of disk space (not counting event cache)

For example, to support 5 collectors that do not perform event enrichment, you must allocate the following resources: 5 CPU cores, 2.5 GB of RAM, and 5 GB of free disk space.

Recommended hardware and software requirements for installation of the KUMA services

 

Collector

Correlator

Storage

CPU

Intel or AMD with SSE 4.2 support:

at least 4 cores/8 threads or 8 virtual CPUs.

Intel or AMD with SSE 4.2 support:

at least 4 cores/8 threads or 8 virtual CPUs.

Intel or AMD with SSE 4.2 support:

at least 12 cores/24 threads or 24 virtual CPUs.

RAM

16 GB

16 GB

48 GB

Free disk space

/opt directory size: at least 500 GB.

/opt directory size: at least 500 GB.

/opt directory size: at least 500 GB.

Operating systems
  • Ubuntu 22.04 LTS (Jammy Jellyfish).
  • Oracle Linux 8.6, 8.7, 9.2, 9.4.
  • Astra Linux Special Edition RUSB.10015-01 (2021-1126SE17 update 1.7.1).
  • Astra Linux Special Edition RUSB. 10015-01 (2022-1011SE17MD update 1.7.2.UU.1).
  • Astra Linux Special Edition RUSB.10015-01 (2022-1110SE17 update 1.7.3). Core version 5.15.0.33 or higher is required.
  • Astra Linux Special Edition RUSB.10015-01 (2023-0630SE17MD update 1.7.4.UU.1).
  • Astra Linux Special Edition RUSB.10015-01 (2023-1023SE17MD update 1.7.5).

Network bandwidth

100 Mbps

100 Mbps

The transfer rate between ClickHouse nodes must be at least 10 Gbps if the data stream exceeds 20,000 EPS.

Installation of KUMA is supported in the following virtual environments:

  • VMware 6.5 or later
  • Hyper-V for Windows Server 2012 R2 or later
  • QEMU-KVM 4.2 or later
  • Software package of virtualization tools "Brest" RDTSP.10001-02

Kaspersky recommendations for storage servers

For storage servers Kaspersky specialists recommend the following:

  • Put ClickHouse on solid state drives (SSD). SSDs help improve data access speed. Hard drives can be used to store data using the HDFS technology.
  • To connect a data storage system to storage servers, use high-speed protocols, such as Fibre Channel or iSCSI 10G. We do not recommend using application-level protocols such as NFS and SMB to connect data storage systems.
  • Use the ext4 file system on ClickHouse cluster servers.
  • If you are using RAID arrays, use RAID 0 for high performance, or RAID 10 for high performance and fault tolerance.
  • To ensure fault tolerance and performance of the data storage subsystem, make sure that ClickHouse nodes are deployed strictly on different disk arrays.
  • If you are using a virtualized infrastructure to host system components, deploy ClickHouse cluster nodes on different hypervisors. In this case, it is necessary to prevent two virtual machines with ClickHouse from working on the same hypervisor.
  • For high-load KUMA installations, install ClickHouse on physical servers.

Requirements for devices for installing agents

To have data sent to the KUMA collector, you must install agents on the network infrastructure devices. Hardware and software requirements are listed in the table below.

Recommended hardware and software requirements for installation of agents

 

Windows devices

Linux devices

CPU

Single-core, 1.4 GHz or higher

Single-core, 1.4 GHz or higher

RAM

512 MB

512 MB

Free disk space

1 GB

1 GB

Operating systems
  • Microsoft Windows 2012
  • Microsoft Windows Server 2012 R2
  • Microsoft Windows Server 2016
  • Microsoft Windows Server 2019
  • Microsoft Windows 10 20H2, 21H1
  • Astra Linux Special Edition RUSB.10015-01 (2023-0426SE17 update 1.7.4)
  • Ubuntu 22.04 LTS (Jammy Jellyfish)
  • Debian 11.7 (Bullseye)
Page top
[Topic 265299]

OSMP Console requirements

OSMP Console Server

For hardware and software requirements, refer to the requirements for a worker node.

Client devices

For a client device, use of OSMP Console requires only a browser.

The minimum screen resolution is 1366x768 pixels.

The hardware and software requirements for the device are identical to the requirements of the browser that is used with OSMP Console.

Browsers:

  • Google Chrome 100.0.4896.88 or later (official build)
  • Microsoft Edge 100 or later
  • Safari 15 on macOS
  • "Yandex" Browser 23.5.0.2271 or later
  • Mozilla Firefox Extended Support Release 102.0 or later

Page top
[Topic 255792]

Network Agent requirements

Minimum hardware requirements:

  • CPU with operating frequency of 1 GHz or higher. For a 64-bit operating system, the minimum CPU frequency is 1.4 GHz.
  • RAM: 512 MB.
  • Available disk space: 1 GB.

Software requirement for Linux-based devices: the Perl language interpreter version 5.10 or higher must be installed.

The following operating systems are supported:

  • Microsoft Windows Embedded POSReady 2009 with latest Service Pack 32-bit
  • Microsoft Windows Embedded 7 Standard with Service Pack 1 32-bit/64-bit
  • Microsoft Windows Embedded 8.1 Industry Pro 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 2015 LTSB 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 2016 LTSB 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise 2015 LTSB 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise 2016 LTSB 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 2019 LTSC 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise version 1703 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise version 1709 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise version 1803 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise version 1809 32-bit/64-bit
  • Microsoft Windows 10 20H2 IoT Enterprise 32-bit/64-bit
  • Microsoft Windows 10 21H2 IoT Enterprise 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise version 1909 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise LTSC 2021 32-bit/64-bit
  • Microsoft Windows 10 IoT Enterprise version 1607 32-bit/64-bit
  • Microsoft Windows 10 Home RS3 (Fall Creators Update, v1709) 32-bit/64-bit
  • Microsoft Windows 10 Pro RS3 (Fall Creators Update, v1709) 32-bit/64-bit
  • Microsoft Windows 10 Pro for Workstations RS3 (Fall Creators Update, v1709) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise RS3 (Fall Creators Update, v1709) 32-bit/64-bit
  • Microsoft Windows 10 Education RS3 (Fall Creators Update, v1709) 32-bit/64-bit
  • Microsoft Windows 10 Home RS4 (April 2018 Update, 17134) 32-bit/64-bit
  • Microsoft Windows 10 Pro RS4 (April 2018 Update, 17134) 32-bit/64-bit
  • Microsoft Windows 10 Pro for Workstations RS4 (April 2018 Update, 17134) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise RS4 (April 2018 Update, 17134) 32-bit/64-bit
  • Microsoft Windows 10 Education RS4 (April 2018 Update, 17134) 32-bit/64-bit
  • Microsoft Windows 10 Home RS5 (October 2018) 32-bit/64-bit
  • Microsoft Windows 10 Pro RS5 (October 2018) 32-bit/64-bit
  • Microsoft Windows 10 Pro for Workstations RS5 (October 2018) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise RS5 (October 2018) 32-bit/64-bit
  • Microsoft Windows 10 Education RS5 (October 2018) 32-bit/64-bit
  • Microsoft Windows 10 Home 19H1 32-bit/64-bit
  • Microsoft Windows 10 Pro 19H1 32-bit/64-bit
  • Microsoft Windows 10 Pro for Workstations 19H1 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 19H1 32-bit/64-bit
  • Microsoft Windows 10 Education 19H1 32-bit/64-bit
  • Microsoft Windows 10 Home 19H2 32-bit/64-bit
  • Microsoft Windows 10 Pro 19H2 32-bit/64-bit
  • Microsoft Windows 10 Pro for Workstations 19H2 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 19H2 32-bit/64-bit
  • Microsoft Windows 10 Education 19H2 32-bit/64-bit
  • Microsoft Windows 10 Home 20H1 (May 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Pro 20H1 (May 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 20H1 (May 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Education 20H1 (May 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Home 20H2 (October 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Pro 20H2 (October 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 20H2 (October 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Education 20H2 (October 2020 Update) 32-bit/64-bit
  • Microsoft Windows 10 Home 21H1 (May 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Pro 21H1 (May 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 21H1 (May 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Education 21H1 (May 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Home 21H2 (October 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Pro 21H2 (October 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 21H2 (October 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Education 21H2 (October 2021 Update) 32-bit/64-bit
  • Microsoft Windows 10 Home 22H2 (October 2023 Update) 32-bit/64-bit
  • Microsoft Windows 10 Pro 22H2 (October 2023 Update) 32-bit/64-bit
  • Microsoft Windows 10 Enterprise 22H2 (October 2023 Update) 32-bit/64-bit
  • Microsoft Windows 10 Education 22H2 (October 2023 Update) 32-bit/64-bit
  • Microsoft Windows 11 Home 64-bit
  • Microsoft Windows 11 Pro 64-bit
  • Microsoft Windows 11 Enterprise 64-bit
  • Microsoft Windows 11 Education 64-bit
  • Microsoft Windows 11 22H2
  • Microsoft Windows 8.1 Pro 32-bit/64-bit
  • Microsoft Windows 8.1 Enterprise 32-bit/64-bit
  • Microsoft Windows 8 Pro 32-bit/64-bit
  • Microsoft Windows 8 Enterprise 32-bit/64-bit
  • Microsoft Windows 7 Professional with Service Pack 1 and later 32-bit/64-bit
  • Microsoft Windows 7 Enterprise/Ultimate with Service Pack 1 and later 32-bit/64-bit
  • Microsoft Windows 7 Home Basic/Premium with Service Pack 1 and later 32-bit/64-bit
  • Microsoft Windows XP Professional with Service Pack 2 32-bit/64-bit (supported by Network Agent version 10.5.1781 only)
  • Microsoft Windows XP Professional with Service Pack 3 and later 32-bit (supported by Network Agent version 14.0.0.20023)
  • Microsoft Windows XP Professional for Embedded Systems with Service Pack 3 32-bit (supported by Network Agent version 14.0.0.20023)
  • Windows MultiPoint Server 2011 Standard/Premium 64-bit
  • Windows Server 2003 SP1 32-bit/64-bit (supported only by Network Agent version 10.5.1781, which you can request through Technical Support)
  • Windows Server 2008 Foundation with Service Pack 2 32-bit/64-bit
  • Windows Server 2008 with Service Pack 2 (all editions) 32-bit/64-bit
  • Windows Server 2008 R2 Datacenter with Service Pack 1 and later 64-bit
  • Windows Server 2008 R2 Enterprise with Service Pack 1 and later 64-bit
  • Windows Server 2008 R2 Foundation with Service Pack 1 and later 64-bit
  • Windows Server 2008 R2 Core Mode with Service Pack 1 and later 64-bit
  • Windows Server 2008 R2 Standard with Service Pack 1 and later 64-bit
  • Windows Server 2008 R2 with Service Pack 1 (all editions) 64-bit
  • Windows Server 2012 Server Core 64-bit
  • Windows Server 2012 Datacenter 64-bit
  • Windows Server 2012 Essentials 64-bit
  • Windows Server 2012 Foundation 64-bit
  • Windows Server 2012 Standard 64-bit
  • Windows Server 2012 R2 Server Core 64-bit
  • Windows Server 2012 R2 Datacenter 64-bit
  • Windows Server 2012 R2 Essentials 64-bit
  • Windows Server 2012 R2 Foundation 64-bit
  • Windows Server 2012 R2 Standard 64-bit
  • Windows Server 2016 Datacenter (LTSB) 64-bit
  • Windows Server 2016 Standard (LTSB) 64-bit
  • Windows Server 2016 Server Core (Installation Option) (LTSB) 64-bit
  • Windows Server 2019 Standard 64-bit
  • Windows Server 2019 Datacenter 64-bit
  • Windows Server 2019 Core 64-bit
  • Windows Server 2022 Standard 64-bit
  • Windows Server 2022 Datacenter 64-bit
  • Windows Server 2022 Core 64-bit
  • Debian GNU/Linux 10.х (Buster) 32-bit/64-bit
  • Debian GNU/Linux 11.х (Bullseye) 32-bit/64-bit
  • Debian GNU/Linux 12 (Bookworm) 32-bit/64-bit
  • Ubuntu Server 18.04 LTS (Bionic Beaver) 32-bit/64-bit
  • Ubuntu Server 20.04 LTS (Focal Fossa) 32-bit/64-bit
  • Ubuntu Server 22.04 LTS (Jammy Jellyfish) 64-bit
  • CentOS 7.x 64-bit
  • CentOS Stream 9 64-bit
  • Red Hat Enterprise Linux Server 6.x 32-bit/64-bit
  • Red Hat Enterprise Linux Server 7.x 64-bit
  • Red Hat Enterprise Linux Server 8.x 64-bit
  • Red Hat Enterprise Linux Server 9.x 64-bit
  • SUSE Linux Enterprise Server 12 (all Service Packs) 64-bit
  • SUSE Linux Enterprise Server 15 (all Service Packs) 64-bit
  • SUSE Linux Enterprise Desktop 15 with Service Pack 3 ARM 64-bit
  • openSUSE 15 64-bit
  • EulerOS 2.0 SP8 ARM 64-bit
  • Astra Linux Special Edition RUSB.10015-01 (operational update 1.6) 64-bit
  • Astra Linux Special Edition RUSB.10015-01 (operational update 1.7) 64-bit
  • Astra Linux Special Edition RUSB.10015-01 (operational update 1.8) 64-bit
  • Astra Linux Common Edition (operational update 2.12) 64-bit
  • Astra Linux Special Edition RUSB.10152-02 (operational update 4.7) ARM 64-bit
  • ALT SP Server 10 64-bit
  • ALT SP Workstation 10 64-bit
  • ALT Server 10 64-bit
  • ALT Server 9.2 64-bit
  • ALT Workstation 9.2 32-bit/64-bit
  • ALT Workstation 10 32-bit/64-bit
  • ALT 8 SP Server (LKNV.11100-01) 64-bit
  • ALT 8 SP Server (LKNV.11100-02) 64-bit
  • ALT 8 SP Server (LKNV.11100-03) 64-bit
  • ALT 8 SP Workstation (LKNV.11100-01) 32-bit/64-bit
  • ALT 8 SP Workstation (LKNV.11100-02) 32-bit/64-bit
  • ALT 8 SP Workstation (LKNV.11100-03) 32-bit/64-bit
  • Mageia 4 32-bit
  • Oracle Linux 7 64-bit
  • Oracle Linux 8 64-bit
  • Oracle Linux 9 64-bit
  • Linux Mint 20.x 64-bit
  • AlterOS 7.5 and later 64-bit
  • GosLinux IC6 64-bit
  • RED OS 7.3 Server 64-bit
  • RED OS 7.3 Certified Edition 64-bit
  • ROSA COBALT 7.9 64-bit
  • ROSA CHROME 12 64-bit
  • macOS Big Sur (11.x)
  • macOS Monterey (12.x)
  • macOS Ventura (13.x)
  • macOS Sonoma (14.x)

    For Network Agent, the Apple Silicon (M1) architecture is also supported, as well as Intel.

The following virtualization platforms are supported:

  • VMware vSphere 6.7
  • VMware vSphere 7.0
  • VMware vSphere 8.0
  • VMware Workstation 16 Pro
  • VMware Workstation 17 Pro
  • Microsoft Hyper-V Server 2012 64-bit
  • Microsoft Hyper-V Server 2012 R2 64-bit
  • Microsoft Hyper-V Server 2016 64-bit
  • Microsoft Hyper-V Server 2019 64-bit
  • Microsoft Hyper-V Server 2022 64-bit
  • Citrix XenServer 7.1 LTSR
  • Citrix XenServer 8.x
  • Parallels Desktop 17
  • Oracle VM VirtualBox 6.x
  • Oracle VM VirtualBox 7.x
  • Kernel-based Virtual Machine (all Linux operating systems supported by Network Agent)

On the devices running Windows 10 version RS4 or RS5, Kaspersky Security Center might be unable to detect some vulnerabilities in folders where case sensitivity is enabled.

Before installing Network Agent on the devices running Windows 7, Windows Server 2008, Windows Server 2008 R2 or Windows MultiPoint Server 2011, make sure that you have installed the security update KB3063858 for OS Windows (Security Update for Windows 7 (KB3063858), Security Update for Windows 7 for x64-based Systems (KB3063858), Security Update for Windows Server 2008 (KB3063858), Security Update for Windows Server 2008 x64 Edition (KB3063858), Security Update for Windows Server 2008 R2 x64 Edition (KB3063858).

In Microsoft Windows XP, Network Agent might not perform some operations correctly.

You can install or update Network Agent for Windows XP in Microsoft Windows XP only. The supported editions of Microsoft Windows XP and their corresponding versions of the Network Agent are listed in the list of supported operating systems. You can download the required version of the Network Agent for Microsoft Windows XP from this page.

We recommend that you install the same version of the Network Agent for Linux as Open Single Management Platform.

Open Single Management Platform fully supports Network Agent of the same or newer versions.

Network Agent for macOS is provided together with Kaspersky security application for this operating system.

Page top
[Topic 255797]